Operation - ESAB EMP 255ic Instruction Manual

5 OPERATION

5 OPERATION
General safety regulations for handling the equipment can be found in the chapter
"Safety". Read it through before you start the equipment.
NOTE!
When moving the equipment use intended handle. Never pull the cables.
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
Electric shock! Do not touch the workpiece or the welding head during operation!
WARNING!
Assure that the side covers are closed during operation.
WARNING!
Tighten the bobbin bolt to prevent it from sliding off the hub.
0463 605 001 - 14 - © ESAB AB 2018