4 INSTALLATION
4
INSTALLATION
The installation must be carried out by a professional.
CAUTION!
This product is intended for industrial use. In a domestic environment this product may
cause radio interference. It is the user's responsibility to take adequate precautions.
4.1
Location
Position the power source so that its cooling air inlets and outlets are not obstructed.
WARNING!
Secure the equipment - particularly
if the ground is uneven or sloping.
4.2
Lifting instructions
The power source can be lifted using any of the handles. Mechanical lifting must be done
with both outer handles.
0463 605 001
A. 152 mm (6 in.)
B. 100 mm (4 in.)
C. 152 mm (6 in.)
- 11 -
© ESAB AB 2018