Description And Technical Specifications; Digidriverip - ProLights DIGIDRIVERIP User Manual

DIGIDRIVERIP - DIGISTRIPIP50 - DIGISTRIPIP100 3

- 1 - DESCRIPTION AND TECHNICAL SPECIFICATIONS

1.1 DIGIDRIVERIP

DIGIDRIVERIP is a driver which provides power and processing to the DIGISTRIPIP. It has 2 outputs and
can control up to 20 DIGISTRIPIP100 and 40 DIGISTRIPIP50 each offering the control of up to 3600 pixels
in a one rack unit, offering 20 DMX universes and 546 W of power in out. DIGIDRIVERIP can not control
DIGISTRIP, DIGITUBE and DIGITILE. DIGIDRIVERIP is compatible with Art-Net, Kling-Net and sACN protocols
and runs signal and power over a 4 pole XLR cable that allow wiring of units in a chain. The user interface
consists in a black OLED display for settings, protocol selection, Network address and test patterns. The IP
rate is 65 to allow the usage in outdoor events so the user don't need to take care about humidity and rain.
BODY
• Body: Sturdy die-cast aluminium body conceived for long-time durability
• Body Color: Black
CONTROL
• Control units:20 DIGISTRIPIP
• Protocols: Art-Net, Kling-Net, sACN
• Pixel Control: Pixel2Pixel control
• Display: Black OLED high resolution display
ELECTRONICS
• Operating Temperature: -20° ~ +45°
ELECTRICAL
• Power Supply: 100-240V – 50/60Hz
• Power Consumption (at 230V):546 W
• Power Consumption (at 120V):570 W
• Output (at 230V):5 units on a single power line
• Output (at 120V):2 units on a single power line
PHYSICAL
• Signal Connection:2xRJ45 and 4p out
• Power Connection: PowerCON TRUE1 in/out
• IP:65 for outdoor events
• Cooling: Natural cooling of the peculiar chassis and to absence of fans
• Suspension And Fixing: Any position with "quick-lock" omega brackets
• Dimensions (WxHxD):483x263x84 mm
• Weight:4,47 kg
483 263
Technical drawing
Fig.1