Charging The Battery - Fakir Robert II User Manual

Charging the battery

Assembly / Charging the battery
Place the docking station on the flat ground against to
the wall. Make sure no obstacles ahead 3 meters and
within 1 meters scope.
Attention!
Before you use the robot for the first time,
please check whether the battery is fully
charged.
Charging with the docking station:
Connect the adapter to the charging station first, then
insert to the power supply and place the vacuum
cleaner on the station for charging. The green indica-
tor will flash when looking for charging station, the
green indicator on charging station will be off when
charge back successfully. The green indicator will
breath during charging and keep green on after fully
charged.
Charging via the remote control:
When the cleaner is not in error mode, press the
button to let the machine enter the recharge mode.
Auto recharge:
In low battery, the green
the recharge mode.
When the vacuum cleaner is in standby mode, double-
click the
and blinks at the same time, which means it enters
auto-recharging mode.
indicator will flash entering
button and then the indicator turns green
39