Charging The Battery - Fakir Starky HSA 600 L User Manual

Attention!
• Do not install on weak structures such as plaster walls and compressed wood
boards when their thickness is less than 10 mm
• To prevent fire or electric shock due to leakage, please do not install it on
metal walls
• Hanging area must be flat
• Docking station must be placed in ambient temperature betwee n 5°C and
40°C
• Ensure screw will not damage gas pipe, water pipe or wire insides of the wall
• No part of the appliance should touch the ground when placed on the docking
station

Charging the battery

Information on charging
the battery
HSA 600 L
Docking station / Charging the battery
The battery will be charged only if the vacuum cleaner
is switched off.
Please do not rechange immediately after using up
the power.Please rechange when batteries be cooled
for at least one hour.
Please unplay the power supply once found all indi-
cating lights blink at the same time.Let the cleaner
cool for a while then rechange it again
1. Recharge on the docking station:
(a)Connect the adapter to the docking station and
socket, power indicator flickers
(b) Connect socket and appliance with adaptor
and cord, and power indicator starts to flicker
2. Recharge on flat surface:
(b) Connect socket and main body with adaptor
and cord, and power indicator starts to flicker
Tips : To avoid falling appliance should be
charged horizontally, with no brush and extension
tube attached
3. Please do not charge if the ambient temperature
is lower than 5°C or higher than 40°C
4. Insufficient power indicator for quantity of electric-
ity flickers when you get an insufficient power in
operation process
Attention!
Attention!
37