Fakir Robert II User Manual page 42

Symbol
Auto cleaning
button
Edge cleaning
button
Single room
cleaning mode
Time setting
Scheduling
Auto charging
Note!
If the remote control doesn't respond, please check the batteries.
If you still can't operate the cleaner after charge, re-pair again:
Keep the cleaner in the standby mode (red light on), press the
prox. 6 sec. and two beep sounds the red and green indicator will flash alternatly,
then release the key. Long press
machine and remote control should be less than 1 m).
Second method: In off mode (light off) long press
on, hold button and meanwhile long press
Remarks:
If there's no beep sound during above operations, the pair-code operation is failed.
42
Remote control
Function Information
- Press the button to switch into auto cleaning mode. It will
look for the charge station automatically when cleaning is
finished.
- Press the button to switch into edge cleaning mode. It will
look for the charge station automatically when edge cleaning
is finished.
- Press the button to switch into single room cleaning mode.
It will look for the charge station for 30 mins. automatically
when cleaning is finished.
1. Press this button to adjust the hour. Press it and
on the display screen will flash. Then press the up/down key.
2. Press the left/right-turn key
to adjust the minute.
3. Please save your settings by pressing
Pay attention to am or pm when setting the time.
1. Press this button to adjust the hour. Press it and
on the display screen will flash. Then press the up/down
key ( ).
2. Press the left/right-turn key
to adjust the minute.
3. Save your settings by pressing the
Press the button to enter recharging mode.
and
and
till you hear beep sound (distance beetween
till next beep sound.
to change into
or
to change into
or key.
button, after ap-
till beep sound and red light
+
.
and