5.3
PROGRAMMING MENU
Functioning of the module is programmable using a series of parameters grouped into 4 sub-menus:
Menu
Time/day
SET-POINT
Advanced parameters (Lev.1)
Installation parameters (Lev.2)
5.3.1 PROGRAMMING CLOCK/DAY
DESCR
MENU
DISPLAY
ORA
GIO
To modify the time, repeatedly press the "MODE" button until you arrive to the time parameter.
-
Press the "SET" button to enter the menu to change the date and hour
-
During the modification of the parameters, the symbol
38
x
The CPS module indicates with the symbol
parameter.
x
Press the SET button to save the parameters which have been set and exit the
programming mode.
x
Press ESC to exit the programming mode without saving any of the parameters
which have been changed.
Description
To enter the time and day of the week.
To change the system pressure SET-POINT.
To change setting parameters.
To change system setting parameters.
x
For a correct configuration, we recommend using the "installation" and
"advanced" parameters with the machine on STOP and connected to the power
supply.
x
During the first installation phase, the module display flashes to indicate the
internal clock needs updating.
x
The clock is equipped with a battery to maintain the time and date for 24 hours if
there is no power.
PARAMETER
NAME
Time
Time on system
Day of week
Day of week
DESCRIPTION
on the display lights up.
Page 11 of 30
11 - GB -
the modification status of the
DEF
MIN
MAX
00:00
00:00
23:59
MO
MO
.
SU