Table of Contents
Advertisement
1. BAR/PSI
-
Current pressure, shown in large numbers on the display.
-
Currently active set point (set 1 or set 2), shown in small numbers on the display.
-
Pressure unit of measurement (bar or PSI).
-
Frequency graph indicator.
-
Day of the week.
-
Master (P) or Slave (S), only for unit configuration.
2. Hz
-
Current frequency of the pump in Hz.
-
Frequency graph indicator
-
Day of the week.
3. A
-
Current absorbed by the pump in Ampere.
-
Frequency graph indicator
-
Day of the week
4. hh:mm
-
Time.
-
Day of the week.
-
Frequency graph indicator
5. Complementary pump status (unit only)
-
"STB" the complementary pump is on standby
-
"ON "the complementary pump is on and regulating
-
"TOP" the complementary pump is on and is at the maximum possible frequency.
-
< Alarm Code > the complementary pump is in alarm (for a description of alarm codes, please
see Chpt. 6.0)
The parameter displayed by default is pressure (BAR or PSI); after 10 minutes of displaying one of the other
parameters the system automatically returns to displaying pressure.
Æ System pressure
Æ Motor frequency
Æ Absorbed current
Æ Time
Page 10 of 30
10 - GB -
37
Advertisement
Table of Contents
