Operation; Weighing; Taring - KERN WTB-N Series Operating Instructions Manual

8 Operation

8.1 Weighing

 Start balance by pressing
 However, you can reset the weighing scale to zero by pressing
 Switch off balance using

8.2 Taring

The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the weighed material is displayed in subsequent weighings.
 Put on weighing receptacles and press
(example)

 Place goods to be weighed in the weighing container.
(example)
25
The balance will carry out a self-test
When the weight display shows "0.0" and the triangle symbol
above the stability display
for weighing.
the key.
The "0.0" display disappears and the scales are switched off.
The zero display appears, and above the reset symbol
the stability symbol
triangle appears.
The weight of the container is now internally saved.
The net weight of the goods to be weighed is displayed.
The weight of the weighing container will be displayed as a
minus number (=gross weight) after removing the weighing
container.
.
appears, the scale is ready
.
.
and the net weight symbol
WTB-N_WTB-NM-BA-e-1622
the