Set Auto-Off Function - KERN WTB-N Series Operating Instructions Manual

9.3 Set auto-OFF function

 Switch on the scales by
 Press

 Select function using

 Use
 Select the desired parameter using



"F5 oFF" appears, now the function is enabled
 Press
 Press
WTB-N_WTB-NM-BA-e-1622
test, press until "F1 CAL" is displayed.
repeatedly until „F5 oFF" appears
to change between the individual parameters
repeatedly until "bACK" appears
The balance carries out a restart and changes to weighing
mode
and during the balance's self-
32