Uhf Pll Body-Pack Transmitter - JTS RU-992 Instruction Manual

4-4 UHF PLL body-pack transmitter //

Mute/Power: push once to turn the unit on. While the unit is on, push once to
1
mute and push again to talk. Push and hold for 2 seconds to turn off.
Ultrasonic receiving unit: it receives the pairing signals from the ultrasonic
2
transmission unit at the receiver end.
LED indicator: it shows the transmitter's status, including battery level, mute
3
and pairing indication.
LCD display: it shows the parameter settings in the transmitter.
4
Antenna: the antenna of transmitter
5
Microphone input port: 4P mini XLR jack
6
SET: it allows parameter settings, including frequency, group, channel, sensitiv-
7
ity, input signal attenuation, auto off countdown, lock on.
▲/▼: these are used with "SET" to change the parameter settings.
8
Battery holder: it holds UM3, AA 1.5V battery or rechargeable battery x 2.
9
Charging contact: if rechargeable batteries are used, this transmitter can be
10
recharged with an optional charger.
13
5
3
1
6
10
2
4
7
8 8
9