Volume Adjustment - JTS RU-992 Instruction Manual

◎ ATOF: Automatic microphone off countdown under mute status
OFF This function is deactivated
1 1 minute countdown to turn off
10 10 minute countdown to turn off
30 30 minute countdown to turn off
(The default setting is 10 minute.)
◎ RFP: RF microphone power
The transmitter comes with 2 stages of RF power output (as per local regulations).
rF Lo 10mW
rF Hi 50mW
◎ RC (Remoset Configuration)
rC-FrE Only frequency and group
setting will be synchronized
rC-ALL All data setting will be
synchronized
(The default setting is rC-FrE.)

Volume adjustment

In non-setting mode, adjust the volume from 0 to -31dB using the ▲/▼ button.
The minimum volume is -31 dB.
●
The maximum volume is 0 dB.
●
The default setting is -10 dB.
●
This function is deactivated.
This shows that the RF output is LOW (10mW).
Only frequency and group setting will be
synchronized.
Minimum volume at -31db; maximum volume
at 0dB.
24