I33Lk, I43Lk Attachment - Kingsman Marquis IDV26 Installation Instructions Manual

I33LK, I43LK
Vent adapter and venting must be connected to the unit before Clean Views and surrounds are attached.
Refer to Installation of Vent Pipe for venting information.
I43LK KIT
-Louvered Front
-Black Grills
-Safety Screen
- [3] DT Screws
1. Install the LK Front to the appliance by lowering it onto the side attachments, aligning the four [4] Mounting Tabs and
Slots together. Position the tabs into the slots and then lock it into place by lowering the LK Front onto the hook
assembly.
2. Once the LK Front is in place simply fasten it to the appliance with three [3] screws from the Top Mount.
3. Route the ON/OFF switch wires through the slot provided at the lower right side of the LK Front.
NOTE: The Louver Kit Front does not need to be removed to access the Glass Door and service the unit.
Safety Screen
-Attachment
PARTS LISTS
I43LKS1BL, I43LKS2BL, I43LKS3BL
LK Kit
LK Mount Tabs
Insert Tab into
Slot to mount the
LK Kit.
SURROUND KITS
-Surround
-[6] #6 Black Screws
ON / OFF Switch
-Top Mount-
IDV33 - This part
is attached to the
fireplace and
must be removed.
Mount Slot
58