Suzuki CELERIO Series Owner's Manual page 249

OTHER CONTROLS AND EQUIPMENT
The anti-theft function is intended to dis-
courage thefts, such as that the audio sys-
tem becomes inoperable when it is
installed on other vehicles.
This function works by entering a Personal
Identification Number (PIN).
When the unit is disconnected from its
power source, such as when the audio
system is removed or the battery is discon-
nected, the unit will become inoperable
until the PIN is reentered.
Setting the Anti-Theft Function
1) Press the VOL PUSH POWER knob (1)
to power off.
2) Hold down the buttons numbered [1]
and [6] of the Preset buttons (2) and
press the VOL PUSH POWER knob
(1).
"SECURITY" will be displayed.
3) Press the TRACK Up button (3) and the
button numbered [1] of the Preset but-
tons (2) simultaneously.
4) Enter a 4-digit number to be registered
as PIN using the buttons numbered [1] -
[4] of the Preset buttons (2).
5) Press the SOUND button (4) for 1 sec-
ond or longer to set the anti-theft func-
tion.
NOTE:
Take a note of the registered PIN and keep
it for the future use.
5-99
Canceling the anti-theft feature
To cancel the anti-theft function, delete the
registered PIN.
1) Press the VOL PUSH POWER knob (1)
to power off.
2) Hold down the buttons numbered [1]
and [6] of the Preset buttons (2) and
press the VOL PUSH POWER knob
(1).
"PIN ENTRY" will be displayed.
3) Press the TRACK Up button (3) and the
button numbered [1] of the Preset but-
tons (2) simultaneously.
4) Enter a 4-digit number to be registered
as PIN using the buttons numbered [1] -
[4] of the Preset buttons (2).
5) Press the SOUND button (4) for 1 sec-
ond or longer to delete the registered
PIN. The indication "----" will be dis-
played and the anti-theft function will be
canceled.
NOTE:
To change your PIN, first delete your cur-
rent PIN, then set a new one.
Confirming the Personal Identification
Number (PIN)
When the main power source is discon-
nected such as when the battery is
replaced, etc, it is required to enter the PIN
to make the unit operable again.
1) Set the ignition switch to the "ACC"
position.
"SECURITY" will be displayed.
2) Press the TRACK Up button (3) and the
button numbered [1] of the Preset but-
tons (2) simultaneously.
3) Enter a 4-digit number to be registered
as PIN using the buttons numbered [1] -
[4] of the Preset buttons (2).
4) Press the SOUND button (4) for 1 sec-
ond or longer.
When the PIN same as registered is
entered, the power of the audio system
will be turned off automatically and it
will become operable again.
NOTE:
If an incorrect PIN is entered, "ERROR"
and the total number of incorrect entry
attempts will be displayed.
If an incorrect PIN is entered 10 times,
"HELP" will be displayed and the audio
system will become inoperable.
84MM6-01E