Suzuki CELERIO Series Owner's Manual page 214

Table of Contents

Advertisement

Registration of audio devices
®
To use Bluetooth
-ready audio devices
with this unit, it is required to register the
devices.
NOTE:
• To set up a new audio player, disconnect
the phone from the unit. Connect the
phone after audio player setup is com-
pleted if necessary.
• When failed to establish the connection
within 120 seconds, the connecting
operation will be canceled. Please try
again or refer to the audio player manual
for assistance with the pairing process.
®
1) Press the Bluetooth
setup button (6).
®
The Bluetooth
setup menu will be dis-
played.
2) Turn
the
TUNE
FOLDER
SOUND knob (2) to select "Setup Blue-
tooth", and press the knob (2) to deter-
mine the selection.
3) Turn
the
TUNE
FOLDER
SOUND knob (2) to select "Pairing",
and press the knob (2) to determine the
selection.
4) Select "CAR AUDIO" from the Blue-
®
tooth
menu of the audio player and
establish the pairing.
Refer to the manual of the audio player
in use for further information.
5) Enter the Passkey displayed on the unit
to the audio player.
NOTE:
• When selecting "Go Back", the previous
menu will be displayed.
• When
additionally
registering
devices, operate the same step from 1).
®
Selecting the Bluetooth
Press the MEDIA button (1).
Each time the button is pressed, the mode
will change as follows:
USB (iPod
) (if equipped)
®
®
Bluetooth
audio (if equipped)
Selecting a group (only for supported
models)
PUSH
Turn the TUNE FOLDER PUSH SOUND
knob (2) to select a group.
Selecting a track
PUSH
• Press the Up button (3) to listen to the
next track.
• Press the Down button (4) twice to listen
to the previous track.
When the Down button (4) is pressed
once, the track currently being played
will start from the beginning again.
OTHER CONTROLS AND EQUIPMENT
Fast forwarding/Rewinding a track
• Hold down the Up button (3) to fast for-
ward the track.
audio
• Hold down the Down button (4) to fast
rewind the track.
NOTE:
audio mode
Some functions may not be available
depending on Bluetooth
Display change
Press the DISP button (5).
Each time the button is pressed, display
will change as follows:
Play time
Track name
Artist name
Album name
NOTE:
If text data contains more than 16 charac-
ters, the ">" mark will appear at the right
end. Holding down the DISP button (5) for
1 second or longer can display the next
page.
®
audio.
5-64
84MM6-01E

Advertisement

Table of Contents
loading

Table of Contents