Suzuki CELERIO Series Owner's Manual page 175

OTHER CONTROLS AND EQUIPMENT
System Operating Instructions
Natural ventilation
Select "VENTILATION" and "FRESH AIR",
the temperature selector to the desired
temperature position, and the blower
speed selector to "OFF". Fresh air will flow
through the vehicle during driving.
Forced ventilation
The control settings are the same as for
natural ventilation except you set the
blower speed selector to a position other
than "OFF".
Normal cooling
Set the air flow selector to "VENTILA-
TION", the temperature selector to the
desired temperature position and the
blower speed selector to the desired
blower speed position, and set the selector
to a position other than "OFF". Setting the
blower speed selector to a higher blower
speed position increases cooling effi-
ciency.
You can switch the air intake selector to
either "FRESH AIR" or "RECIRCULATED
AIR" as you desire. Choosing "RECIRCU-
LATED AIR" increases cooling efficiency.
5-25
Quick cooling (using recirculated air)
The control settings are the same as for
normal cooling except you select "RECIR-
CULATED AIR" and the highest blower
speed.
NOTE:
• If you select "RECIRCULATED AIR" for
an extended period of time, the air in the
vehicle can become contaminated.
Therefore, you should occasionally
select "FRESH AIR".
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly
while you operate the air conditioner with
the air intake selector at "FRESH AIR"
and the blower at high speed.
Dehumidifying
Set the air flow selector to a desired air
flow selector position, the temperature
selector to the desired temperature posi-
tion and the blower speed selector to the
desired blower speed position. Also select
"FRESH AIR" and set the selector to a
position other than "OFF".
NOTE:
Because the air conditioner dehumidifies
the air, turning it on will help keep the win-
dows clear.
84MM6-01E