Suzuki CELERIO Series Owner's Manual page 231

OTHER CONTROLS AND EQUIPMENT
Selecting the reception band
Press the FM/AM button (1).
Each time the button is pressed, the recep-
tion band will change as follows:
FM1 FM2 AM
Seek tuning
Press the SEEK Up button (2) or the SEEK
Down button (3).
The unit stops searching for a station at a
frequency where a broadcast station is
available.
Manual tuning
Press the TUNE Up button (4) or the
TUNE Down button (5).
The frequency being received is displayed.
Preset memory
1) Select the desired station.
2) Hold down a desired button ([1] to [6])
of the Preset buttons (6) to which you
want to store the station for 2 seconds
or longer.
5-81
Auto store
Hold down the AS button (7) for 2 seconds
or longer.
Six stations in good reception will automat-
ically be stored to the Preset buttons (6) in
order, starting from a station whose fre-
quency is the lowest.
NOTE:
• Auto store can be released by pressing
AS button (7) while auto store is under
way.
• When the auto store is performed, the
station previously stored in the memory
at the position is overwritten.
• When there are fewer than 6 stations
that can be stored even if 1 round of
auto store operation is performed, no
station will be stored at the remaining
Preset buttons (6).
• 6 stations can be preset for FM1 and
FM2 in common, and 6 stations for AM
in auto store mode.
Auto store mode on/off
Press the AS button (7).
Each time the button is pressed, the mode
is switched as follows:
AS mode on AS mode off
Radio Reception
Radio reception can be affected by envi-
ronment, atmospheric conditions, or radio
signal's power and distance from the sta-
tion. Nearby mountains and buildings may
interfere or deflect radio reception, causing
poor reception. Poor reception or radio
static can also be caused by electric cur-
rent from overhead wires or high voltage
power lines.
84MM6-01E