Page 1
Power Supply:AC120V/60Hz. Three Speeds: III=1250±100RPM II=1000±100RPM I=650±100RPM Rated Power: 50W · CADR= 150 m /h · · Air Flow= 165 m /h (140 CFM) Product Size:336 X 235 X595 mm · Unit Weight:6.7Kg. · UV BIOPÜR Air Treatment System 1-888-726-8869 www.sanuvox.com...
Page 2
Operating Instructions UV/ ION ON / OFF Speed Timer Button Setting Button Setting HEPA Change API Display or Clean Timer Reset Air-Flow Auto BEFORE FIRST USE please follow the instructions below: Upon removing the unit from the box: Remove the unit from the plastic bag Remove the cover Remove the Styrofoam Twist latch to allow the filters to be removed...
Page 3
/ 17,500 hours of operation) it is time to replace the HEPA, Carbon filter and UV Lamp. Contact your local vendor for the replacement kit or contact Sanuvox at 1-888-726-8869. Follow the instructions that will accompany the replacement kit on how to replace the UV Lamp. Once the contents of the replacement kit have been installed use a paperclip (or similar object) to press and hold the reset button for 3 seconds.
Page 4
Operating Instructions 9. To Clean the HEPA and pre-filter, remove the black foam pre-filter from the HEPA filter (these are attached with Velcro). Shake off or wash the pre-filter to clean any dirt and/or particulates from the media. Use a vacuum cleaner to clean off the HEPA Filter.
Page 5
Warranty claims are to be made to Sanuvox directly. The customer shall contact Sanuvox at 1-888-726-8869 to obtain the address of a Sanuvox Service Center where the defective unit is to be shipped (at customer's expense) along with a copy of the original invoice.
Need help?
Do you have a question about the BIOPUR and is the answer not in the manual?
Questions and answers