Advertisement

Quick Links

REGISTER
YOUR WARRANTY
ONLINE AT
www.sanuvox.com
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS PRODUCT.
Read and follow all instructions contained in the manual before using the product. Read the maintenance instructions before opening the UV unit
or system. Failure to comply with these instructions may result in injuries or damage to the UV unit or system.
Installation and servicing of UV units or systems (in an
1.
air conditioning system or not) can be hazardous. Only
trained and qualified service personnel should install,
repair or service equipment.
2.
Untrained personnel can perform basic maintenance
functions such as replacing lamp(s) and/or filter(s). All
other operations should be performed by trained service
personnel.
3.
The unit is not to be used by persons (including children)
with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge.
CAUTION: Unit is not a toy. Keep away from
unsupervised children. Do not leave children unattended
with the unit.
4.
DO NOT hang onto the UV unit or system.
5.
Some UV units or systems could be heavy: Make sure
you have a minimum of 2 people to safely move or install
these UV units or systems, and make sure you adopt the
most ergonomic position possible (use UV unit or system
handles, if applicable).
CAUTION: Installing or maintaining heavy equipment,
especially overhead, can cause back pain or other injuries.
6.
When installing or servicing an overhead UV unit or system,
be careful not to fall off the stepladder. Furthermore, make
sure the UV unit or system latches are always in place to
prevent falling parts.
CAUTION: Some parts of some UV units and systems
may open suddenly if the UV unit or system is installed
high up without its locks.
7.
Units that are obviously damaged must not be operated.
Installation Date: _______________
Installer Contact Info.: _________________________________________
SANUVAIR
AIR PURIFICATION SYSTEM WITH HEPA FILTER
Commercial or Residential Model

IMPORTANT SAFETY INSTRUCTIONS

NEVER EXPOSE EYES OR SKIN TO AN OPERATING UV LAMP.
8.
CAUTION: When working on the UV unit or system,
observe precautions on the literature, tags and labels
attached to the UV unit or system, and all other safety
precautions considered as best practices in the HVAC
industry, if applicable.
9.
When applicable, local regulation may comprise more
restrictive installation and/or certification requirements.
The aforementioned requirements prevail on those of this
document and the installer agree to conform to these at his
own expense.
10. Follow all the safety instructions outlined in this document
and respect all local and national codes applicable.
11. All UV units or systems contain a UV-C source. Damage to
the housing or unintended use of the UV unit or system may
result in harmful UV-C leaks. UV-C may, even in little doses,
cause harm to the eyes and skin.
12. Never expose eyes or skin to an operating UV lamp.
Therefore, before installing or performing maintenance
on the UV unit or system, TURN OFF AND DISCONNECT
the UV unit or system from all power sources (there
may be more than one switch to disconnect) and also
disconnect the HVAC system, is applicable.
CAUTION: Electrical shock may cause injuries or
possibly death. FIRST AID INSTRUCTIONS: If injured,
consult a doctor.
13. UV rays may damage certain types of filters (polymer or
plastic); please keep the UV unit or system light away from
shining directly on plastic.
Sanuvox Technologies Inc, © 2020 All rights reserved. November 2021 EN v.1
S300
®
14. When installing or performing maintenance on the UV unit
or system, it is recommended to wear safety gloves. In
order to avoid reduced performance of lamp(s), do not
touch lamp glass without gloves.
15. Just like conventional fluorescent lamps, UV lamps contain
a small quantity of mercury: if a lamp breaks, clean and
dispose of with care. UV lamps can be disposed/recycled
after use in the same way as any other fluorescent lamps.
Contact and follow the specific instructions of your local
and national authorities.
16. Use only specified SANUVOX branded replacement
UV lamps for your UV unit or system. Use of any other
lamps will void your warranty and can result in damage to
the UV unit or system.
17. Sanuvox UV units or systems are not waterproof. DO NOT
INSTALL OUTDOORS OR IN WET LOCATION unless
specified otherwise.
18. The use of a UV unit or system is a supplement to and
not a substitute for standard infection control practices;
users must continue to follow all current infection control
practices, including those related to the cleaning and
disinfection of environmental surfaces.
For any inquiries on a UV unit or system, contact :
Installed by: _________________
Instruction Manual
SAVE THESE INSTRUCTIONS
Robert Smith
146 Barr St, Saint-Laurent
Quebec, CA, H4T 1Y4
1-888-726-8869
techsupport@sanuvox.com

Advertisement

Table of Contents
loading

Summary of Contents for Sanuvox S300

  • Page 1: Important Safety Instructions

    Quebec, CA, H4T 1Y4 high up without its locks. 1-888-726-8869 Units that are obviously damaged must not be operated. techsupport@sanuvox.com Installation Date: _______________ Installed by: _________________ Installer Contact Info.: _________________________________________ Sanuvox Technologies Inc, © 2020 All rights reserved. November 2021 EN v.1...
  • Page 2: Table Of Contents

    Instruction Manual for Sanuvair S300 ® TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS ABOUT THE PRODUCT COMPONENTS How it Works ACCESSORIES & KITS SETUP & INSTALLATION What you will need What’s included Special considerations for integrated system installation Step by Step Setup | UV Lamp &...
  • Page 3: About The Product

    ABOUT THE PRODUCT The Sanuvair S300 is designed to help reduce airborne bacterias, viruses, as well as odors caused by mold and fungus that ® pass through the unit. The UV dose used stops the microbial growth in the air flowing through that unit. The actual percentage of efficiency depends on the velocity of the air and the pollutant treated.
  • Page 4: Setup & Installation

    If you have any questions regarding the installation instructions, call SANUVOX at 1-888-726-8869. What’s included The SANUVAIR S300, a MERV9 prefilter, a HEPA filter, a UV lamp, the access door for the lamp and ballast (white metal plate) ® and a basic installation kit.
  • Page 5 6 screws provided for this purpose. STEP 8 8. Close the filters and motor access door of your S300 unit. You are now ready to install your S300 unit in one of the three suggested installation types.
  • Page 6: Versatile Installations

    (bypass) OR with added ducts (using 8” collars). In a commercial setting, the S300 unit can be positioned horizontally or vertically, on a wall or on a ceiling (with angles and suspension rods). In a residential environment, a ceiling installation with suspension rods is NOT recommended.
  • Page 7: Step By Step Installation | Stand-Alone

    (not included). Make sure you have a power outlet nearby to plug the unit into. CAUTION: Your S300 unit is bulky. Make sure that there are always two people to lift and handle it to avoid any injuries.
  • Page 8: Step By Step Installation | Duct-Mounted (Bypass)

    Make sure you have a power outlet nearby to plug the unit into. CAUTION: Your S300 unit is bulky. Make sure that there are always two people to lift and handle it to avoid any injuries.
  • Page 9: Step By Step Installation | Added Ducts

    (not included). Make sure you have a power outlet nearby to plug the unit into. CAUTION: Your S300 unit is bulky. Make sure that there are always two people to lift and handle it to avoid any injuries.
  • Page 10: Operation

    How to Operate your Product The Sanuvair S300 is an automatic unit: once it’s installed and plugged in, simply press the power switch to turn it ON. Wait ® approximately 40 seconds for the startup phase to be done and enjoy clean air in your home! To access the door interlock switch and the speed selection switch, open the filters and motor access door at the front of the unit.
  • Page 11: Maintenance

    ® ballast access door (plate), remove and dispose of old lamp, replace with new Sanuvox branded UV lamp, screw back the lamp and ballast access door (plate) and turn power source back on. See below for detailed step by step instructions.
  • Page 12: How To Replace Filters

    Instruction Manual for Sanuvair S300 ® STEP 5 5. Then, slide the porcelain tip through the retention clamp. NOTE: Make sure the lamp is horizontal in this section and not touching the metal walls. STEP 6 6. Screw back in place the access door for the lamp and ballast over the rectangular opening.
  • Page 13: How To Clean Your Product

    ULTRAVIOLETS: UVC The UVC (254 nm) wavelengths produced by Sanuvox UV units and systems are the same as the ultraviolets produced by the Sun. The UVC attacks the micro-organisms on a molecular level deactivating the contaminants. Unlike conventional UV lamps on the market, Sanuvox UV units and systems use a patented process designed to deliver the maximum UV dosage to the moving airstream or surface.
  • Page 14: Warranty

    This warranty applies only to the original purchaser of this product from the original date of purchase. At its option, SANUVOX will repair or replace this product if it is found to be defective in material or workmanship.

Table of Contents