Sanuvox SRMax Installation Manual
  1. Manuals
  2. Brands
  3. Sanuvox Manuals
  4. Air Cleaner
  5. SRMax
  6. Installation manual

Sanuvox SRMax Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SRMax Installation Manual
WARNING
READ AND FOLLOW ALL INSTRUCTIONS CONTAINED IN THIS MANUAL BEFORE USE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL
INJURIES OR DAMAGED UNIT.
Installation and servicing of equipment can be hazardous. Only trained and qualiied service personnel
should install, repair or service equipment. Follow national and local safety codes.
Always wear safety glasses and work gloves for protection.
SANUVOX TECHNOLOGIES INC. | 146, rue Barr, St-Laurent, Quebec, Canada H4T 1Y4
1-888-SANUVOX www.sanuvox.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRMax and is the answer not in the manual?

Questions and answers

Related Manuals for Sanuvox SRMax

Summary of Contents for Sanuvox SRMax

  • Page 1 Installation and servicing of equipment can be hazardous. Only trained and qualiied service personnel should install, repair or service equipment. Follow national and local safety codes. Always wear safety glasses and work gloves for protection. SANUVOX TECHNOLOGIES INC. | 146, rue Barr, St-Laurent, Quebec, Canada H4T 1Y4 1-888-SANUVOX www.sanuvox.com...

  • Page 2: Table Of Contents

    VOCS* and odors* that may be circulated through the HVAC system of your home. he SRMax is installed in the RETURN (preferred) or SUPPLY plenum of our HVAC system treating the air passing through the relecting chamber. he actual percentage of destruction obtained is based on percentage of fresh air, air velocity, the number of passes and speciic contaminants to be treated.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING Before installing or performing maintenance on the unit, TURN OFF and disconnect unit from power source. Electrical shock may cause personal injuries or possibly death. Never expose eyes or skin to ultraviolet light from any source. he UV puriier MUST be DISCONNECTED from power source before performing maintenance of service.

  • Page 4: Included In The Box

    - Pair of cotton gloves - Metal screws for cover (Qty:4) - Phillips screws for frame (Qty:6) - 8-32 screws for turbulator (Qty:2) - Frame - Turbulator For information or recommendations to size appropriately your speciic application, please call Sanuvox at 1-888-SANUVOX.
  • Page 5 UV lamp. (120-240V @ 50-60Hz). To ind out the power consump- tion of the SRMax refer to the marking label on your unit. he suggested operating temperature range is 10 to 50°C (50 to 120°F).

  • Page 6: Step By Step Installation

    UV lamp. 1. Prepare the SRMax for installation 1.1 Remove the contents from the packaging. Only ater you have visually inspected the UV lamp should you break the security seal on the underside of the cardboard sleeve.

  • Page 7: Information From The Status Led

    3.1 Place the SRMax into the frame, guided with the alignment pins. 3.2 Secure the SRMax to the frame with the 4 remaining screws located in the 4 corners of the SRMax cover. 3.4 You are now ready to power ON your new SRMax and enjoy great air quality for you and your family.

  • Page 8: Reset The Lamp Timer

    SRMax default factory mode, when the unit 4. From now on, the SRMax will only activate when is plugged in and the power switch is ON, will leave airlow is detected in your duct system.

Table of Contents