Faema E92/A Compact Manual page 22

English
2. Programming
*
Key reading
Code: XX Series: XX
*
engineer
Press key
message is shown on the display
(14):
To load the data, place the “TECHNICIAN” key on sensor (7) and press
the “+” (34) key until the operation is completed.
4
Press key
message is shown on the display
(14):
To save the data, place the “TECHNICIAN” key on sensor (7) and
press the “+” (34) key until the operation is completed.
First frame: place the key on sensor (7) to quit programming in order
prevent the user from programming the machine in “technician mode”.
Place the key on the sensor (7). The key’s code
and series reference are displayed so that another
key can be ordered.
(33), The following
4 4 4
(33), The following
4 4 4
Data OUT
English
Key Reading
4
Data IN NO
Key Reading
4
NO