Seal The Motor - Siemens SIMOTICS FD 1LN1 Operating Instructions & Installation Instructions

Maintenance
9.2 Corrective Maintenance
9.2.6

Seal the motor

Extreme caution and attention to cleanliness are vital to installation.
● Clean all bare joints between parts such as housings, bearing shields and bearing bushes
● Smear bare joints between parts with non-hardening, permanently flexible sealant, such as
● Check all sealing elements, such as those on the terminal boxes, for elasticity, aging or
148
etc., and remove old sealant material.
"Hylomar M". Follow the manufacturer's application and safety instructions when doing this.
damage, and renew them if they are no longer effective.
SIMOTICS FD 1LN1
Operating Instructions 01/2019