Table of Contents
Advertisement
Torsional loadings of the shaft assembly
If the configuration does not correctly recognize the mechanical torsional loadings of the shaft
assembly, this can lead to serious damage to the machine. This can result in death, serious
injury or material damage.
When planning the system, consider the configuration data.
Note
You can find more information in Chapter 2 of catalog D81.8.
4.19
Transport
4.19.1
Safety instructions for transport
Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions
● Comply with the applicable national and sector-specific regulations.
● When using the machine within the European Union, comply with the specifications laid
The information required to correctly attach, lift and transport the machine - such as weight,
center of gravity and attachment points - is provided here:
● Machine dimension drawing and the associated explanations
● Transport data
● Rating plate and lifting plate, if available
● Shipping parts list
● Packaging
Danger when incorrectly lifting and transporting
Danger of death, serious injury, or substantial material damage caused by tipping or falling
transported goods. Comply with the following safety instructions:
● All work must be performed with due caution and care.
● Comply with any notes in the shipping papers.
SIMOTICS FD 1LN1
Operating Instructions 01/2019
WARNING
down in EN 50110‑1 regarding safe operation of electrical equipment.
Preparations for use
4.19 Transport
41
Advertisement
Table of Contents
