Siemens SIMOTICS FD 1LN1 Operating Instructions & Installation Instructions page 131

Criteria
Basic oil viscosity
Additives
FE9 test: A/1500/6000
Behavior in the presence of water
Corrosive effect on copper
Corrosion resistance (EMCOR)
Solid matter content, particle sizes >
25 µm
Suitability of bearings
Speed parameter nxdm
Recommended greases for rolling bearings
For standard applications, the following high-quality greases are recommended for rolling
bearings for vertical and horizontal motor constructions due to their technical properties:
Table 9-4
Manufacturer
Shell
ExxonMobil/Esso
BP
Fuchs
Lubcon
Addinol
FAG
For motors of horizontal construction you can alternatively use greases with NLGI class 2.
However, this reduces the lubrication interval by 20%.
Table 9-5
Manufacturer
Shell
ExxonMobil/Esso
BP
Castrol
Lubcon
SIMOTICS FD 1LN1
Operating Instructions 01/2019
Standard
DIN 51562-1
-
DIN 51821-1/-2
DIN 51807
DIN 51811
DIN 51802 /
ISO 11007
DIN 51813
-
Rolling bearing greases for vertical and horizontal types of construction
Grease type
Gadus S2 V100 3
Unirex N3
Energrease LS3
Renolit H443 HD88
Turmoplex 3
LM 3 EP
Arcanol Multi 3
Alternative greases with NLGI class 2 for motors of horizontal construction
Grease type
Gadus S2 V100 2
Unirex N2
Energrease LS2
Longtime PD2
Turmogrease L 802 EP plus
Property, characteristic value
● Approx. 100 mm²/s at 40 °C
● Approx. 10 mm²/s at 100 °C
● Anti-Oxidation (AO), Anti-Wear (AW)
● No solid lubricants
● Alternatively: Extreme-pressure (EP) only after
prior consultation with grease and bearing
manufacturers
F10 ≥50 h at +130 °C
F50 ≥100 h at +130 °C
0 or 1 at a test temperature of +90° C
0 or 1 at a test temperature of +120° C
0 - 0
<10 mg/kg
Suitable for the built-in motor bearings, seals and
these speeds
Maintenance
9.1 Inspection and maintenance
Unit
mm²/s
-
H
-
Korr.°
Korr.°
mg/kg
-
mm/min
131