BlueSpin (Hotplate) Magnetic Stirrer
9. Maintenance and Cleaning
•
Proper maintenance can keep instruments working
properly and lengthen its lifetime.
•
Do not spray cleanser into the instrument when
cleaning.
•
Unplug the power line when cleaning.
•
Only use recommended cleansers:
Dyes
Isopropyl alcohol
Construction materials
Water containing tenside
/ Isopropyl alcohol
Cosmetics
Water containing tenside
/ Isopropyl alcohol
Foodstuffs
Water containing tenside
Fuels
Water containing tenside
•
Before
using
other
method
decontamination, the user must ascertain with the
manufacturer that this method will not harm the
instrument. Wear the proper protective gloves during
cleaning of the instrument.
Note:
•
Electronic device can not clean with
cleanser.
•
•
10. Associated
Regulations
Construction in accordance with the following safety
standards:
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1)
for
cleaning
or
EN 61010-2-10
Construction in accordance with the following EMC
standards:
EN 61326-1
Associated EU guidelines:
EMC-guidelines: 89/336/EWG
Instrument guidelines: 73/023/EWG
11
If you require maintenance service, must be
cleaned the instrument in advance to avoid
pollution of hazardous substances, and to
send back into original packing.
If the instrument will not use for a long time,
please switch off and place in a dry, clean,
room temperature and stable location.
Standards
and
Need help?
Do you have a question about the MS-H280 and is the answer not in the manual?