Faults; Maintenance And Cleaning - Scilogex HB120-S User Manual

8. Faults

•
Instruments can't be power ON
Check whether the power line is unplugged
Check whether the fuse is broken or loose
•
Fault in power on self test
-
Switch OFF the unit, then switch ON and reset
the instruments to factory default setting.
If these faults are
manufacturer/supplier.

9. Maintenance and Cleaning

•
Proper maintenance can keep instruments working
properly and lengthen its lifetime.
•
Do not spray cleanser into the instrument when
cleaning.
•
Unplug the power line when cleaning.
•
Only use recommended cleansers:
Dyes
Construction materials
Cosmetics
not resolved, please
Isopropyl alcohol
Water containing tenside
/ Isopropyl alcohol
Water containing tenside
/ Isopropyl alcohol
Foodstuffs
Fuels
•
Before
decontamination, the user must ascertain with the
manufacturer that this method will not harm the
instrument. Wear the proper protective gloves during
cleaning of the instrument.
contact
Note:
•
•
•
8
Water containing tenside
Water containing tenside
Table 4
using other method
Electronic device can not clean with
cleanser.
If you require maintenance service, must be
cleaned the instrument in advance to avoid
pollution of hazardous substances, and to
send back into original packing.
If the instrument will not use for a long time,
please switch off and place in a dry, clean,
room temperature and stable location.
for cleaning or