Faults; Maintenance And Cleaning - Scilogex SCI-L180-E User Manual

Note:
The speed value can be altered during shaking.

6. Faults

•
When switched ON, the instrument does not work
n Check whether the power cable is connected
•
Motor s peed c annot r each s et v alue
n Check whether it is overloaded

7. Maintenance and Cleaning

•
Proper maintenance can keep instrument working
properly and lengthen its lifetime.
•
Do not spray cleanser into the instrument when
cleaning.
•
Do not remove the power line when cleaning. Only
use recommended cleansers:
Dyes
Construction
Materials
Cosmetics
Isopropyl alcohol
Water containing tenside
Isopropyl alcohol
Water containing tenside
Foodstuffs
Fuels
•
Before using
decontamination, the user must ascertain with the
manufacturer that this method will not damage the
instrument. Wear the proper protective gloves during
cleaning of the instrument.
Note:
•
Electronic device cannot clean with cleanser.
•
If you require maintenance service, must be
cleaned the instrument in advance to avoid
pollution of hazardous substances, and to
send back into original packing.
•
If the instrument will not use for a long time,
please switch off and place in a dry, clean,
room temperature and stable location.
/
/
7
Isopropyl alcohol
Water containing tenside
Water containing tenside
other method for cleaning or