Logs And Print Outputs - Maguire Products VBD-150 Installation Operation & Maintenance

VBD® - Vacuum Dryer®
Print Setup - Logs and Print Outputs
The Print setup is available from the Setup menu. Print Setup prints to USB and has the following options:
Event Log - Enable/Disable, When enabled, prints events to the log file.
Interval - Seconds (default 60s), Automatic time interval to print VBD information to USB.
Content - Detail/Standard, Level of detail printed to the log file.
Print All - Prints the Alarm Log, Event Log and Parameters to a USB flash drive.
Print Parameters - Prints the full parameter and parameter values as well as other information list to the USB
flash drive.
Print Event Log - A combination of machine status lines at defined intervals as well as mechanical events as
they occur.
Print Alarm Log - Prints any alarms recorded since the alarm log was last cleared to USB.
Clear Event Log - Clears all events from the event log in memory.
Clear Alarm Log - Clears all alarms from the event log in memory.
How to print the Event Log, Parameters, or Alarm Log
To print the Alarm Log, Parameters or Event Log a USB Flash Drive must be plugged into the VBD-150.
Press:
Enter: the 5-digit password. (Default password is 22222).
Use the
ENTER to move to the next digit and to finish.
Press: the button several times to move down to the
option "Print Setup". Press ENTER to select.
Press: Press the
print options.
Press: ENTER to print the selected option.
Files will be created on the flash drive in the root of
the drive.
VBDALARM.LOG - Alarm Log
VBDEVENT.LOG - Event Log
VBDPARAM.TXT - Parameter Report
60
to toggle the Mode Selection to
Setup Mode (Gears Icon).
buttons to adjust the digit. Press
button to move down to one of the
Rev. August 31, 2016 – VBD-150
Maguire Products, Inc.
Display will
MODE=SETUP
ENTER PASSWORD
show:
0_ _ _ _
Display will
MODE=SETUP
► Alarm Setup
show:
Auto-Start Setup
Blower Setup
Display will
PRINT SETUP
►Event Log:
show:
Interval:
Content:
Display will
PRINT SETUP
►Print All
show:
Print Parameters
Print Event Log
Display will
PRINTING EVENT LOG
show one or
-=- WAIT -=-
all of the
following:
PRINTING ALARM LOG
-=- WAIT -=-
PRINTING PARAMETERS
-=- WAIT -=-
▼
BACK
ENABLE
60s
DETAIL▼
BACK
▲
▼