Batch Mode - Maguire Products VBD-150 Installation Operation & Maintenance

VBD® - Vacuum Dryer®

Batch Mode

Batch Mode, when ON, enables the dryer to dry a predetermined amount of material and then
automatically stop and display a message indicating the batch is complete.
To enable and run the dryer in Batch Mode follow these steps:
Press:
Enter: the 5-digit password. (Default password is 22222).
Use the
ENTER to move to the next digit and to finish.
Press: the button several times to move down to the
option "Display Setup". Press ENTER to select
Display Setup.
Press: the button once to select Batch Mode. Press
ENTER to toggle Batch Mode to ON.
Press: When complete, navigate to BACK and press
ENTER to exit the communication setup.
Press:
To start the Dryer in Batch Mode:
Press: the button to move to the home screen selection
to Run Dryer (Batch).
Press: ENTER to run the dryer in Batch Mode.
Press: ENTER to select the batch weight field. Enter the
weight (lbs or kgs) to dry after which the dryer will
automatically stop. Use the
the digit. Press ENTER to move to the next digit
and to finish.
Press: When complete use the
to NEXT, the press ENTER. From this screen the
Setpoint Temperature, Preheat Time and Vacuum
Time can be adjusted by using the
When complete, select START and press ENTER to
start the drying processes in Batch Mode. When the
Batch Mode has completed the specified weight, the
dryer will automatically stop and display "BATCH
SHUTDOWN".
to toggle the Mode Selection
to the Gears Icon.
buttons to adjust the digit. Press
To return to the home screen.
This displays Run Dryer (Batch) on the home screen.
button to navigate down
Rev. August 31, 2016 – VBD-150
Display will
Display will
Display will
Display will
Display will
Display will
Display will
Display will
buttons to adjust
Display will
buttons.
Maguire Products, Inc.
SETUP
show: ENTER PASSWORD
0_ _ _ _
SETUP
►Alarm Setup
show:
Auto-Start Setup
Change Password
DISPLAY SETUP
►Batch Mode:
show:
Auto Shutdown:
I/O Status
DISPLAY SETUP
►Batch Mode:
show:
Auto Shutdown:
I/O Status
SETUP
show:
Convey Setup
►Display Setup
Dry Purge Setup
=== SELECT MODE ====
show: Run Dryer
►Run Dryer (Batch)
Clean Out
BATCH RUN
show: ►Batch Weight:
(lbs.)
==============
BATCH RUN
►Batch Weight:
show:
(lbs.)
==============
Setpoint Temp.:150F
show: Preheat Time:
Vacuum Time:
==============►START
▼
BACK
OFF
ON
ON▼
BACK
ON
ON
ON▼
▼
▼
BACK
0
NEXT
BACK
0
NEXT
35m
20m
41