Maguire Products VBD-150 Installation Operation & Maintenance page 29

VBD® - Vacuum Dryer®
Auto-Start Setup
Auto-Stop Setup
Communications
Convey Setup
Dispense Setup
Display Setup
is triggered.
OFF: Disables both the vacuum chamber dump
alarm and vacuum chamber Dump retries.
Print Alarm Log - Prints the Alarm Log. See page 60.
Clear Alarm Log - Clears the Alarm Log. See page 60.
Auto-Starts the Dryer at a specified Time and Day(s). Can be set to
Auto-Start the Dryer at one time only or on a repeated schedule.
Auto-Stop the Dryer at a specified Time and Day(s). Can be set to
Auto-Stop the Dryer at one time only or on a repeated schedule.
Communication setup. See page 42.
Convey Setup - Material Convey Options - Optional - Uses
dedicated outputs on the I/O board that may be used to control
customer supplied Loader(s).
See the I/O Board Wiring Diagram on page 73
• Loader 1 - Off / Auto - Stops loader that supplies the heating
hopper for shutdown sequence.
• Loader 2 - Off / Auto - When material is ready, loader will
convey material away from dryer retention hopper. When
enabled, select Throughput or Weight.
• Reset Totalizer - Resets Weighed totals to zero. Totals are
the amount of material that has been conveyed away from
the dryer since the Totalizer has been reset.
Fill Weight – The desired weight of material to be dispensed into
the Vacuum Chamber.
Bulk Density – Bulk density of the material in either pounds per
cubic foot or kilograms per liter (depending on the weigh unit of
measurement in Loadcell Setup).
Fill Wt. Adj (Fill Weight Adjust) – Off / On – When ON the dryer
will automatically adjust the fill weight to be in appropriate proportion
with the throughput. A Low throughput will result in a lower fill
weight.
Show / Hide Information and options on the controller screens
Batch Mode - ON/OFF – When ON, the option to dry a batch
of material is displayed on the home screen.
Auto Shutdown - ON/OFF – When ON, the option to initiate
an auto shutdown (shut down at a specified time) is
displayed on the shutdown options screen.
Rev. August 31, 2016 – VBD-150
Maguire Products, Inc.
29