Installing The Burner - Viessmann Vitodens 100 Series Installation And Service Instructions Manual

Further details regarding the individual steps

Installing the burner

A 4x
F E
1. Fit the burner and diagonally
tighten 4 screws A to a torque of
8.5 Nm.
2. Insert new gasket. Secure the fit-
ting of gas supply pipe B.
Commissioning, inspection, maintenance
6. Fill trap A with water. For this,
7. Check that condensate can drain
B C
D
3. Refit Venturi extension C to the
4. Fit the cables to fan motor D, gas
(cont.)
pour approx. 0.3 l of water into the
combustion chamber.
freely and that the connections are
tight.
fan.
train E and ignition unit F.
51