Further details regarding the individual steps
Limiting the maximum heating output
1. Hold down MODE and
neously for approx. 5 s.
■ "SEt" and
flash.
■ "PL:1" is shown on the additional
display.
2. Press MODE.
3. Use
/
to select "P03".
Removing the burner
F 4x
C
B
1. Switch OFF the power supply.
Commissioning, inspection, maintenance
simulta-
4. OK to confirm
5. Use
6. OK to confirm
7. MODE to exit the parameter level.
E
D
A
2. Shut off the gas supply.
(cont.)
/
to set the max. heating
output in % of the upper rated heat-
ing output.
Setting range 40 to 100 %
47