Leica M 10 Instructions Manual page 175

B� With thumbwheel 'programmed' accordingly
1. Select the menu item
Customize Control
2. in the sub-menu
Customize Wheel
3. in the respective sub-menu
4. confirm the function by pressing the Center button
5. Use the thumbwheel 28 to select the desired value.
C� Using the menu
1. Select the menu item
Exp. Compensation
• The monitor shows a scale as a sub-menu:
A
A Set compensation value (mark at
2. Set the desired value.
,
,
, and
Exp. Compensation
.
30
.
= switched off)
O
Displays
– In cases A and B, the compensation value is displayed in the
viewfinder, for example
1.0-
the shutter speed). Then in the form of changed shutter speeds
and a flashing dot at the bottom in the viewfinder, or for about
0.5s when the display is activated.
– Regardless of the setting method, the value is displayed in the
monitor in Live View mode and in the Information screen if the
viewfinder is being used by means of a mark in the lower part of
the light balance, and in the output menu list by means of
.
X 1
Important:
An exposure compensation set on the camera only influences
metering of the available light, i.e. not flash light (for more informa-
tion about flash photography, refer to the sections starting on p.
182).
Regardless of how the set compensation was originally entered:
– It remains effective until it is manually reset to
whether the camera has been turned off and back on in the
meantime.
– It can be reset using either the menu or the thumbwheel.
Example, either plus or minus, "±X" stands for the respective value
1
/ (temporary display instead of
0.3
EV+_
, regardless of
0
EN
171