Description; Work Parts Of The Machine; Machine Assembly At The Customer; Commissioning - Farmet DISKOMAT 3 Operating Manual

Manual
DISKOMAT 3 | 3,5

1. DESCRIPTION

The DISKOMAT 3, DISKOMAT 3,5 machines are designed as carried with a three-point
linkage of category TBZ 3. Diskomat consists of a frame that carries two rows of working discs with a diameter
of 620 mm with automatic spring protection. There are deflectors directing and breaking flying soil located
behind the front as well as the rear row of discs. There are rubber-tyred rollers in the rear that compact the
loosened soil.

WORK PARTS OF THE MACHINE

Fig. 2 – Work Parts of the Machine
1.1.1
1.1.1 Towing suspension
1.1.2 Front disc row
1.1.3 Front deflectors

2. MACHINE ASSEMBLY AT THE CUSTOMER

 The operator must perform the assembly according to the instructions of the producer, best in cooperation
with the expert servicing technician determined by the producer.

The operator must secure a functional test of all assembled parts after the completion of the machine
assembly.

The operator must secure that the handling of the machine using lifting equipment during its assembly is
in accordance with chapter "C".

3. COMMISSIONING

 Before taking over the machine, test and check, whether damage occurred during transport and whether
all parts contained in the bill of delivery were supplied.
 Before commissioning the machine, carefully read this operating manual, especially Chapters A-D p. 4-8.
Before the first use of the machine, familiarise yourselves with its controls and overall function.

During work with the machine, observe not only the instructions of this operating manual but also
generally valid regulations of work safety, health protection, fire and transport safety, and environmental
protection.

The operator must check the machine before every use (commissioning) from the standpoint of
completeness, work safety, work hygiene, fire safety, transport safety, and environmental protection.
Stroj A machine showing signs of damage must not be commissioned.
Central frame
1.1.2 1.1.3 1.1.4 1.1.5
1.1.4 Rear disc row
1.1.5 Rear deflectors
1.1.6 Rear roller (various types)
9 │ 19
1.1.6