Machine Storage; Machine Lubrication Schedule - Farmet DISKOMAT 3 Operating Manual

Manual
DISKOMAT 3 | 3,5

7. MACHINE STORAGE

Long-term machine shutdown:
 Store the machine under a roof if possible.
 Store the machine on a flat and solid surface with sufficient load capacity.

Clean the machine before storing and conserve so that it is not damaged in any way during storage. Pay
special attention to all marked lubrication points and properly lubricate them according to the lubrication
plan.

Store the machine in the position with folded frames in the transport position. Secure the machine against
spontaneous movement using scotches or another suitable tool.

Secure the machine against access of unauthorised persons.

8. MACHINE LUBRICATION SCHEDULE

 During machine maintenance and its lubrication, it is necessary to observe the safety regulations.
Table 4 – Locations and Intervals of the Machine Lubrication
LUBRICATION POINT
Rollers bearings
Disc bearings
Fig.4 – Rollers bearing
Lubricant handling:
Protect yourselves against direct contact with oils by using gloves or protective creams. Thoroughly wash
oil spots on the skin using warm water and soap. Do not clean the skin with petrol, engine diesel fuel or
other solvents.
Oil is poisonous. If you swallowed the oil, immediately seek a physician.
 Protect the lubricants against children.
INTERVAL
- Daily, always before the work with the
machine.
Fig.4
- Always after the end of the season and
before storing the machine
- Always after the end of the season and
Fig.5
before storing the machine
16 │ 19
KP2P-20 Likx
dle DIN 51 502
Fig. 5 - Disc bearings
LUBRICANT
Plastic grease