Manual
DISKOMAT 3 | 3,5
5. MACHINE ADJUSTMENT
Fig. 3 – Machine adjustment
2 - seřízení podélné
5.2 - Setting the
lengthwise level
roviny stroje
5.1 SETTING THE WORKING DEPTH
Set the working depth using the bottom pin on the rear roller frame gate according to the scale (5-18cm)
5.2 SETTING THE MACHINE USING TRACTOR´S TPS ARMS
Set the lengthwise level of the machine by positioning the lower arms of the tractor and adjusting the third
point of the tractor, thus ensuring the same depth of processing for the first and second row of
Setting the drawbar length
Setting the tractor arms height
5.3 - Setting the side deflector
5.4 – Roller fixture
Disky – hloubka zpracování
Discs – processing depth
13 │ 19
5.1 - Setting the working depth
Rear roller
discs.