User; Load Memory; Save Memory; Inputs - Datavideo SE-700 Quick Start Manual

User

In this option, the user is allowed to load previously saved settings and save the currently configured settings.
Start
Keyer
P-in-P
P-in-P Keyer
DSK
Still
User

Inputs

Outputs
Setup

Load Memory

Use the up/down arrow to scroll to the desired memory location and load the saved setting by selecting "Load"

Save Memory

Use the up/down arrow to scroll to the desired memory location and save the current setting by selecting "Save"
Inputs
This feature allows the user to configure the color of the Inputs 1-4. In addition, the user can shuffle the contents
between Inputs 1-4, Still and Freeze.
Start
Keyer
P-in-P
P-in-P Keyer
DSK
Still
User
Inputs
Outputs
Setup

Input 1-4

By selecting the corresponding input (Inputs 1-4), the user will then be allowed to configure the colour of the input
1-4 by adjusting its Black Level, White Clip and Chroma Gain parameters.

Crosspoint

Crosspoint gives the user the ability to shuffle the contents between Inputs 1-4, Still and Freeze. In other words,
the user will be able to assign any of the sources of Inputs 1-4, Still and Freeze to the 6 input buttons (1, 2, 3, 4, Still
and Freeze) of the Program and Preset rows as desired.
Load Mem Memory
Save Mem Memory
Input 1 Black
Input 2 Black
Input 3 Black
Input 4 Black
Crosspoint 1
4
32
13 Load
13 Save
0 White 100
White
0 100
0 White 100
0 White 100
Input 1 2 Input 2
5
Input 4 Still
Chrom 1.0
Chrom
1.0
Chrom 1.0
Chrom 1.0
3 Input 3
6
Freeze