Wiping Between Sources - Datavideo SE-700 Quick Start Manual

Wiping between sources

In order to WIPE between two video sources first ensure the transition background or TRANS BG button is ON.
TRANS BG
Pressing WIPE will use the current wipe transition selected when moving from the program video source to the
selected next source on the preset row.
WIPE transition effect
The timing of this MIX transition can be manually decided when moving the T-Bar or completed over a set time
when using the AUTO button.
To change the rate of transition for the AUTO button follow the menu path START> TRANSITION and change the
M/E duration value in frames. If this value is small then the wipe transition will happen quickly. If this value is
larger then the wipe will take longer to complete.
Wipe Transition
Selection
BDR ON/OFF
BDR SOFT
BDR COLOR
BDR SIZE
Enables background transition between Program / Preset
WIPE Transition Selection
Each Wipe button consists of black and white colors. The white
represents the current Program image and the black represents
the WIPE-IN image. There are a total of 32 WIPE presets offered by
the SE-700; the WIPE buttons allow the user to make a selection
directly from the control panel for the first 12 and remaining 20
WIPE effects are selectable from the menu path START > WIPE >
WIPE VALUE
REV pressing this button reverses the direction of the WIPE.
Turns the WIPE border function ON/OFF
Adjustment of the border softness
To fine tune the border softness, please use the menu path
START > WIPE > SOFT
Select the border color by pressing this button
To fine tune the border color, please use the menu path
START > BORDER > to change HUE, LUMA and SAT values
Selection of the border width
23