Cisco ASA 5506-X Configuration Manual page 367

Chapter 16 ASA FirePOWER (SFR) Module
Showing Module Status
To check the status of a module, enter one of the following commands:
•
•
The following is sample output from the show module command for an ASA 5585-X with an ASA
FirePOWER hardware module installed:
hostname# show module
Mod
---- -------------------------------------------- ------------------ -----------
0 ASA 5585-X Security Services Processor-10 wi ASA5585-SSP-10
1 ASA 5585-X FirePOWER Security Services Proce ASA5585-SSP-SFR10
Mod
---- --------------------------------- ------------ ------------ ---------------
0 5475.d05b.1100 to 5475.d05b.110b
1 5475.d05b.2450 to 5475.d05b.245b
Mod
---- ------------------------------ ---------------- --------------------------
1 FirePOWER
Mod
---- ------------------ --------------------- -------------
0 Up Sys
1 Up
The following example shows the details for a software module. Note that DC Addr indicates the address
of the FireSIGHT Management Center that manages this device.
hostname# show module sfr details
Getting details from the Service Module, please wait...
Card Type:
Model:
Hardware version:
Serial Number:
Firmware version:
Software version:
MAC Address Range:
App. name:
App. Status:
App. Status Desc:
App. version:
Data Plane Status:
Status:
DC addr:
Mgmt IP addr:
Mgmt Network mask:
Mgmt Gateway:
Mgmt web ports:
Mgmt TLS enabled:
show module [1 | sfr] [details]
Shows the status of modules. Include the 1 (for hardware modules) or sfr (for software modules)
keyword to see status specific to the ASA FirePOWER module. Include the details keyword to get
additional information, including the address of the device that manages the module.
show module sfr recover
Displays the location of the boot image used when installing the module.
Card Type
MAC Address Range
SSM Application Name
Status Data Plane Status
Not Applicable
Up
FirePOWER Services Software Module
ASA5555
N/A
FCH1714J6HP
N/A
5.3.1-100
bc16.6520.1dcb to bc16.6520.1dcb
ASA FirePOWER
Up
Normal Operation
5.3.1-100
Up
Up
10.89.133.202
10.86.118.7
255.255.252.0
10.86.116.1
443
true
Model
Hw Version Fw Version
1.0 2.0(7)0
1.0 2.0(13)0
Status SSM Application Version
Up 5.3.1-44
Compatibility
Cisco ASA Series Firewall CLI Configuration Guide
Monitoring the ASA FirePOWER Module
Serial No.
JAF1507AMKE
JAF1510BLSA
Sw Version
100.10(0)8
5.3.1-44
16-27