Cisco ASA 5506-X Configuration Manual page 209

Chapter 8 Inspection for Voice and Video Protocols
Verifying and Monitoring MGCP Inspection
The show mgcp commands command lists the number of MGCP commands in the command queue. The
show mgcp sessions command lists the number of existing MGCP sessions. The detail option includes
additional information about each command (or session) in the output. The following is sample output
from the show mgcp commands command:
hostname# show mgcp commands
1 in use, 1 most used, 200 maximum allowed
CRCX, gateway IP: host-pc-2, transaction ID: 2052, idle: 0:00:07
The following is sample output from the show mgcp detail command.
hostname# show mgcp commands detail
1 in use, 1 most used, 200 maximum allowed
CRCX, idle: 0:00:10
The following is sample output from the show mgcp sessions command.
hostname# show mgcp sessions
1 in use, 1 most used
Gateway IP host-pc-2, connection ID 6789af54c9, active 0:00:11
The following is sample output from the show mgcp sessions detail command.
hostname# show mgcp sessions detail
1 in use, 1 most used
Session active 0:00:14
RTSP Inspection
The following sections describe RTSP application inspection.
•
•
•
•
Gateway IP host-pc-2
Transaction ID 2052
Endpoint name aaln/1
Call ID 9876543210abcdef
Connection ID
Media IP 192.168.5.7
Media port 6058
Gateway IP host-pc-2
Call ID 9876543210abcdef
Connection ID 6789af54c9
Endpoint name aaln/1
Media lcl port 6166
Media rmt IP 192.168.5.7
Media rmt port 6058
RTSP Inspection Overview, page 8-18
RealPlayer Configuration Requirements, page 8-18
Limitations for RSTP Inspection, page 8-18
Configure RTSP Inspection, page 8-19
Cisco ASA Series Firewall CLI Configuration Guide
RTSP Inspection
8-17