Cisco ASA 5506-X Configuration Manual page 214

RTSP Inspection
Add or edit a policy map that sets the actions to take with the class map traffic.
Step 2
policy-map name
Example:
hostname(config)# policy-map global_policy
In the default configuration, the global_policy policy map is assigned globally to all interfaces. If you
want to edit the global_policy, enter global_policy as the policy name.
Identify the L3/L4 class map you are using for RTSP inspection.
Step 3
class name
Example:
hostname(config-pmap)# class inspection_default
To edit the default policy, or to use the special inspection_default class map in a new policy, specify
inspection_default for the name. Otherwise, you are specifying the class you created earlier in this
procedure.
Step 4 Configure RTSP inspection.
inspect rtsp [rtsp_policy_map]
Where rtsp_policy_map is the optional RTSP inspection policy map. You need a map only if you want
non-default inspection processing. For information on creating the RTSP inspection policy map, see
Configure RTSP Inspection Policy Map, page
Example:
hostname(config-class)# no inspect rtsp
hostname(config-class)# inspect rtsp rtsp-map
Note
If you are editing an existing service policy (such as the default global policy called global_policy), you
Step 5
are done. Otherwise, activate the policy map on one or more interfaces.
service-policy policymap_name {global | interface interface_name}
Example:
hostname(config)# service-policy global_policy global
The global keyword applies the policy map to all interfaces, and interface applies the policy to one
interface. Only one global policy is allowed. You can override the global policy on an interface by
applying a service policy to that interface. You can only apply one policy map to each interface.
Cisco ASA Series Firewall CLI Configuration Guide
8-22
If you are editing the default global policy (or any in-use policy) to use a different RTSP
inspection policy map, you must remove the RTSP inspection with the no inspect rtsp
command, and then re-add it with the new RTSP inspection policy map name.
Chapter 8 Inspection for Voice and Video Protocols
8-19.