Siemens SINAMICS S120 Equipment Manual page 8

Preface
Note
Fulfilling the EMC Directive
SINAMICS S units fulfill EMC Directive 2014/30/EU in the configuration specified in the
associated EC Declaration of Conformity for EMC and when the EMC installation guideline
provided in the Configuration Manual with Article No. 6FC5297-0AD30-0AP3 is
implemented.
Note
Machinery directive
With safety functions for Safety Integrated, the devices fulfill the requirements according to
the machinery directive 2006/42/EC.
Note
Ensuring reliable operation
The manual describes a desired state. The required reliable operation and the compliance
with EMC limit values can only be ensured when this is maintained.
Spare parts
Spare parts are available on the Internet at:
https://support.industry.siemens.com/sc/de/en/sc/2110
Test certificates
Test certificates for functional safety functions ("Safety Integrated") can be found at:
https://support.industry.siemens.com/cs
An up-to-date list of currently certified components is also available on request from your
local Siemens office. If you have any questions relating to certifications that have not yet
been completed, please ask your Siemens contact.
Note on the design of a UL-approved system
Note
Design of a UL-approved system
For a UL-approved system use 60/75° C copper conductors only.
8
Water-cooled chassis power units for common cooling circuits
Manual, 08/2017, 6SL3097-4AM10-0BP0