Siemens SINAMICS S120 Equipment Manual page 68

Line-side power components
3.2 Active Interface Modules
Article number
Max. connection cross-section
- line connection (U1, V1, W1)
- load connection (U2, V2, W2)
- to the filter Module (U1, V1, W1)
- PE connection
Degree of protection
Dimensions
- Width
- Height
- Depth
Weight
Filter module
Article number
Cooling method
Power loss, max.
2)
- At 50 Hz 690 V
- At 60 Hz 575 V
- Dissipated to the ambient air
Liquid volumes of the filter module
Coolant connections
Intake and connection to filter reactor
Tightening torque for coolant connections
Max. connection cross-sections
- to the filter reactor (U1, V1, W1)
- PE connection
Degree of protection
Dimensions
- Width
- Height
- Depth
Weight
Bypass contactor is not included, must be provided separately.
1)
The specified power loss is the maximum value at 100% utilization level. The value in normal operation is lower.
2)
The circuit breaker is controlled by the sequence control of the Active Line Module, and it is not permissible that it is
3)
manually closed. Therefore, we recommend that the circuit breaker is equipped with a locking set 3WL9111-0BA21-
0AA0.
68
6SL3305– 7TE41–4AA7
mm² 1500
mm² 1500
mm² 2 x 95
mm² 1 x 240
IP00
mm 382
mm 698
mm <575
kg 299
6SL3005- 0FE41-4AA7
Water cooling system with integrated heat exchanger manufac-
kW 3.6
kW 3.6
kW 0.15
dm³ 1
Nm 6
mm² 2 x 95
mm² 2 x 120
IP00
mm 300
mm 864
mm 540
kg 160
Water-cooled chassis power units for common cooling circuits
7TE41–4AA7
1500
1500
2 x 95
1 x 240
IP00
382
698
<575
299
0FE41-4AA7
tured out of a copper-nickel alloy
3.6
3.6
0.15
1
Pipe thread ISO 228 - G 3/4 B
(external thread 3/4", flat-sealing)
6
2 x 95
2 x 120
IP00
300
864
540
160
Manual, 08/2017, 6SL3097-4AM10-0BP0