Webasto Air Top EVO 40 Operating Instructions Manual
Marine air heater
Hide thumbs
Also See for Air Top EVO 40:
- Service manual (63 pages) ,
- Workshop manual (59 pages) ,
- Installation & operation manual (44 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Webasto Air Top EVO 40
Summary of Contents for Webasto Air Top EVO 40
- Page 2 Symbol - Quick heating function On/Off button Symbol - Ventilation Function selector switch Rotary knob (temperature/fan) Symbol - Eco function Operating indicator/fault code Symbol - Standard heating function indicator/service indicator Rotary knob for: Changes to the settings on the - Switching on and off control rheostat will be carried out - Setting the room temperature with a time delay.
- Page 3 Purpose of the document These operating instructions are part of the product and provides the user with information on the safe operation of the unit. Using this document Before operating the heater, carefully read these operating instructions as well as the operating instructions for the heater. Keep these operating instructions in the vehicle.
- Page 4 C o nt ro l Name of controls Warranty and liability Webasto shall not assume liability for defects or damage that are the result that the installation and operating instructions as well as the instructions contained therein being disregarded. This liability exclusion particularly applies to:...
- Page 5 Keep the hot air flow free. Risk of injury from the defective unit Do not operate a defective heater. Contact a Webasto service workshop WARNING Risk of explosion in environments with combustible vapours, flammable dust and hazardous goods (e.g. petrol stations,...
- Page 6 As soon as the set temperature is reached, the heater switches back to standard output. Maximum duration of increased heating capacity: Air Top Evo 40: 6 hours Air Top Evo 55: 30 minutes Standard hea- Heats up the space to be heated to the set temperature:...
- Page 7 Heater is on. Turn the function selector switch to the required heating function. To set heating temperature The heating temperature can be set infinitely from 5 °C to 35 °C. Heater is on. Heating function selected. To increase heating temperature Turn rotary knob clockwise. To decrease heating temperature Turn rotary knob anticlockwise.
- Page 8 Set the rotary knob on the control rheostat to the desired position.
- Page 10 IMPORTANT: Heater fault codes can be read using PC Diagnostics, however, the heater lockout reset must be manually performed using the procedure stated above. If you have any questions, contact our technical support team at (800) 860-7866 or via email at: info-us@webasto.com.
-
Page 11: Technical Data
Cleaning Wipe control element with damp cloth. Disposal The control element must not be disposed of in domestic waste. Observe the regional regulations for disposal of electronic products. Service and customer services Do you have any technical queries or a problem with your unit? Country-specific telephone numbers for our branches can be found on the Technical data Operating voltage range: 12 V to 24 V... - Page 12 Rev: 11/2015 Org.