Table of Contents
Advertisement
Status displays and operational controls
8.2.2
Connector X30 ... connectors
PCB connectors X30 ... X32 are available in the MA
Leuze devices via RS 232.
Figure 8.3:
Attention!
Several Leuze devices may not be connected to the MA
RS 232 interface can be operated.
8.2.3
RS 232 service interface – X33
The X33 RS 232 interface facilitates the configuration of the Leuze device and the MA
via PC, which is connected by means of a serial null modem cable.
X33 pin assignment – service connector
Table 8.1:
8.2.4
S10 service switch
The S10 DIP switch can be used to select between the "operation" and "service" modes,
i.e. you switch between the following options here:
• Operation (RUN) = default setting
• Service Leuze device (DEV) and
• Service fieldbus gateway (MA)
Figure 8.4:
38
Connections for Leuze devices
SERVICE (9-pin SUB-D connector)
Pin
SERVICE pin assignment
DIP switch service - operation
Name
2
RXD
3
TXD
5
GND
MA
204i
204i
for connecting the respective
204i
simultaneously, as only one
Remark
Receive Data
Transmit Data
Functional earth
Leuze electronic
204i
Advertisement
Table of Contents
