Table of Contents
Advertisement
MedeaWiz® Hydra™
.
Introduction
The MedeaWiz® Hydra™ is an Input and Output expander for the MedeaWiz® Sprite® HD video
player. It adds multiple trigger inputs and outputs, a motion sensor input and DMX512 control
input. The Hydra connects to the Sprite serial port with the included 3.5mm 4 pole cable.
Many customers will use the factory set default Mode 1. It has 9 push button inputs plus a
motion sensor input and 8 outputs. The first 8 inputs will play files named 001 – 008. The
motion sensor input will also play file 001. The inputs are No Interrupt. This means that once a
file is triggered it will play to the end. Any other triggers during this time are ignored. The
corresponding output 1 – 8 will be active while the file is playing. Input 9 will interrupt and
force the Sprite back to the looping file named 000.
Key Features
Many pre-programmed and user selectable modes of operation including:
9 trigger inputs with 8 sinking outputs
5 x 5 matrix for up to 25 trigger inputs
3 x 4 keypad for up to 99 triggered files
Delayed trigger options
DMX512 control for the Sprite up to 200 files - plus 8 individual sinking outputs
Can control 2 Sprites in some Modes
PIR motion sensor input with user selectable re-trigger delay time from 1 to 999 seconds
Random triggers
Incremented step next / previous triggers
Trigger alternate looping files
Set alternate looping files paired with alternate trigger files
Queued triggers
PIC18F processor can be custom programmed by us or you for specific needs.
The Hydra™ is energy efficient using 5 Volt DC power at an average of 15 mA, and is powered
from the Sprite® video player.
The Hydra is FCC, CE and RoHS certified.
2 |
P a g e
Advertisement
Table of Contents
