Table of Contents
Advertisement
MedeaWiz® Hydra™
.
Now the Hydra will flash the yellow LED to show the count you entered for each digit.
Digit One
Brief pause then
Digit Two
Last, the Green LED will remain on. Green for all trigger input Modes, or Yellow for any DMX mode.
The Mode will be saved in memory. The Hydra will start in this Mode every time power is
applied, until you decide to set a new Mode.
If you enter a Mode that is not programmed in the Hydra, it will default to Mode 1.
Every time power is applied, the Hydra will flash the yellow LED showing the Mode that is set.
X flashes digit 1 -- Pause -- X flashes digit 2 -- Pause -- X flashes digit 3.
In a DMX Mode: The Mode will flash, then a green flash, then the DMX address will flash.
24 |
P a g e
Advertisement
Table of Contents
