Table of Contents
Advertisement
MedeaWiz® Hydra™
.
Wiring a Pushbutton to the Input Port
Each pushbutton should have 2 terminal connections.
Connect either terminal to the "0" terminal on the Hydra.
Connect the other unused terminal to the input number.
If you have a 3 terminal micro-switch button, use the "C" and the "NO" terminals.
Plug the Sprite into Port 1.
Set the Sprite to Serial Control at 9600 Baud. Do Not use Addressing.
Depending on the Mode set in the Hydra, a second Sprite or motion sensor may be plugged into
Port 2.
25 |
P a g e
Advertisement
Table of Contents
