Siemens DMS8000 Application & Planning page 40

Automation level configurations
‡
STT20 with FCGW20-02
40
Building Technologies
CPS Fire Safety
Fig. 26 FS20 Sinteso/FS720 Cerberus PRO/STT20
configuration example
Fig. 27 FS20/FS720 multiple SAFEDLINK loop configuration example
System architecture
This configuration allows for the integration of FS20 Sinteso/FS720 Cerberus PRO,
STT20 fire panels and DESIGO PX building automation controllers.
Note: STT20 is only supported in FCnet/SAFEDLINK topology.
Communication/connection
Both the FS20 Sinteso/FS720 Cerberus PRO and DESIGO PX subsystems can be
connected to the DMS via LAN.
Additionally, several FCxx/FTxx can connect to the DMS via FCnet/SAFEDLINK in
single or multiple SAFEDLINK loops, where up to two stations (Global Access Point(s)
or GAP(s)) act as the connection point for the DMS. For configuration and connectivity
details, see the DMS8000 Network, Fire, and Intrusion Connectivity Configuration
Guide (A6V10062425).
049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
‡
on FCnet/SAFEDLINK
09.2016