Siemens DMS8000 Application & Planning page 28

Automation level configurations
‡
MM8000 only
28
Building Technologies
CPS Fire Safety
Video systems:
- SIMATRIX, SIMATRIX NEO video crossbars
- SISTORE AX, CX, MX (including NVS*), MXpro, SX, Vectis HX and iX
NVR/NVS
- TELSCAN
- IP cameras (fixed) equipped with:
- CCIS1337-LP
- CFVA-IP
- CVVA-IP
*Network Video Software
Access control:
- SiPass Integrated Access Control System
- CerPass CC30 (connected via SiPass)
Building automation:
- DESIGO PX
‡
General automation and I/O systems:
- SIMATIC S7
- MF7033/MM7033 digital PLC unit
- DF8000 digital I/O systems
Remote notification:
- ESPA Paging System
- Analog modem for dial-up connections
rd
3 party systems:
- A number of 3
rd
party systems are supported via NK82xx or MM8000 drivers.
® For details, see section 3.4.
Section 3.2 details the configuration types supported by MM8000 and MK8000.
Note: Combinations of automation level configurations are also supported.
® For network connectivity options, see Appendix A.
049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
‡
09.2016